I have a very strongly made metal spreader bar and chains for sale.
It is strong enough for over 300lbs for suspension play if installed properly(studs).
It is powder coated silver color. So good luck trying to mark it up
Can be used for multiple positions for bondage.
I am selling it for $80.00
or if you are a artist I am more then willing to do a trade!
This would actually be something I'd chase if I could install it. The ceiling in my living-room is concrete. :evil:
awww that would be hard to install... not impossible though
You know you picked the right fandom when difficulties with installing a spreader bar override the fact that it's going in the living-room. Heh. If I had space for it in the bedroom, Velvet, I'd install it there, but I have a loft in place already, alas.
Believe it or not, concrete is easier in my opinion since you don't have to search for the stud/beam/joist behind the drywall of the room , all you need is a hammer drill and concrete bolts, lol
It's not the lack of tools that's a problem, Tor, just that neither the strata council nor my landlord would approve all that terribly of me drilling holes in the concrete. On the other hand, I *do* live with a naughty otter who can readily run a design through Solidworks and then fabricate the result. I could fairly readily weld up a steel frame... and when that's the simple solution to naughty funtimes, maybe there's a madboy at play. ;D
it also works for many bondage positions that dont require any installation.
you know, if it weren't for having mundane's over constantly, i've always wanted something anchored into the ceiling studs that i could hold onto for a little extra OOMPH in the cowgirl position.... maybe i could hang one of those mosquito nets from it to make it look innocent lol
the bar is intimidating to look at by mundanes. I have had many friends over who look at it and gulp. even though i have been using it as a place to hang dry clothes. LOL
eh, it's surprising what you can use naughty tools for...
my vibrating bullet is now my poke-walker diddler.
too bad my mate is vanilla ; ;
one of the reasons I'm selling it is because my mate is as well. This bar was made by a ex.
: Selkit November 07, 2011, 01:37:43 -07:00
It's not the lack of tools that's a problem, Tor, just that neither the strata council nor my landlord would approve all that terribly of me drilling holes in the concrete. On the other hand, I *do* live with a naughty otter who can readily run a design through Solidworks and then fabricate the result. I could fairly readily weld up a steel frame... and when that's the simple solution to naughty funtimes, maybe there's a madboy at play. ;D
Interesting... Does he do side jobs for non-sexual fabricated stuff?
: Selkit November 07, 2011, 01:37:43 -07:00
It's not the lack of tools that's a problem, Tor, just that neither the strata council nor my landlord would approve all that terribly of me drilling holes in the concrete. On the other hand, I *do* live with a naughty otter who can readily run a design through Solidworks and then fabricate the result. I could fairly readily weld up a steel frame... and when that's the simple solution to naughty funtimes, maybe there's a madboy at play. ;D
OOOOOO imagine a bed frame discreet enough to look like it's just a canopy frame, but sturdy enough to bring out the hardware in the evening, and have one or both of you practically swinging from it :O
...everybody buy my art so i can have naughty-time toy of my dreams!
So.. anyone interested ? I'm still trying to sell it.
sorry but I wont even try to ship it. it would be too much because of the weight. it is made from steel.
: velvetkytten November 09, 2011, 01:20:57 -07:00
the bar is intimidating to look at by mundanes. I have had many friends over who look at it and gulp. even though i have been using it as a place to hang dry clothes. LOL
you could just tell them its a chin up/ and hanging crunch bar both completely believable
I live in Surrey, Guildford area.
1. Measurements of the bar and possibly the chains if you are selling them as well?
the bar is 3.5 feet and the chains are almost 2 feet.
2. Possible to ask for closer up picture?
what part of the bar would you like a better picture of ? the ends ?
3. Is the metal rod itself hollow or solid?
it is hollow
4. Does the rod flex under weight? if so how much?
I am not sure if it flexes
5. How deep are the anchors for the ceiling you use? or will you be selling those along with the rod?
We used 3inch eyebolts and put them into the ceiling main josts and yes they come with the bar and chains
6. For picking up. Are you willing to drop it off or prefer/want someone to pick it up in person? or even meeting near or at a skytrain station.
pickup is best for me since I do not drive and the bar is heavy for me to lug around on transit.
Also do you have a cell?
PM me for it
7. What times of the week work best to get the bar?
any afternoon or evening is good. :)
pics
>o< F**k my life, I can't buy naughty toys until May. Body! Y U no 18 yet?!
u corrupt furry u lol would make a great bar for drying wet laundry on
I am a virgin furry lol supper supper innocent yup
just to let everyone know the bar has been sold.